Specifications

E15
6.1 Disc Loading
To load a CD pull open the drawer using the handle on
the left hand side of the unit. Place the CD on the platter
followedbythemagneticpuck.Donotuseapuckfrom
any other Naim CD player. Different Naim CD players use
dissimilar pucks. Push the door closed.
NaimUniti will automatically read the disc index when
the CD drawer is closed. If Auto Select is specified in the
CDsetupmenu(seeSection4.3.1)NaimUnitiwillswitch
automatically to the CD input. If Auto Play is specified the
CDwillbegintoplayfromtrackoneimmediately.
6.2 CD Transport Control
CDtransport(play,stop,etc.)
canbecontrolledfromeither
thefrontpaneltransportbuttons
- play, prev, next stop - or from
the remote handset transport
keys().
Note: To engage or disengage pause using the front panel
controls press play.
6.3 CD Display and Track Selection
When a CD is loaded NaimUniti
will display its total playing time
andnumberoftracks.
If CD auto play is engaged
theCDwillbeginplaying
immediately. During play the
displaywillshowthetracknumberanditselapsedtime.
The stop icon at the top of the display will change to a
play icon.
IneitherplayorstopmodeCDtracksmaybeselected
eitherbyusingthefrontpanelprev and nextbuttonsorthe
handset prev and nextkeys.Tracksmayalsobeselected
byenteringthetracknumbersusingthehandsetnumeric/
text keys.
TorepeatanentireCD(or
programmedrunningorder)press
the handset repeat()key.To
shuffle(randomise)trackorder
press the handset shuffle()
key.
Pressing the front panel or handset ok/list key will switch
the display to list mode where the CD tracks and their
individualrunningtimesarelisted.Trackscanbeselected
NaimUniti CD Player
6 NaimUniti CD Player
NaimUniti incorporates a fully featured CD player based on established Naim practice
using a manual swing-out loading drawer, custom transport control software and unique
digital and analogue electronics. Select the NaimUniti CD input to begin using the CD
player.
CD Play List
Program...
41 6:42
2 4:20
3 3:56
toplaybyscrollingupanddownthelistusingthehandset
up(5)anddown(6)keysandpressingtheok/list key.
AbovethetracklistinthedisplayisaProgram command.
Select Program to alter the CD running order and to
suppress or repeat tracks.
6.4 CD Track Playlist Programming
Selecting Program from a CD
track list opens the Modify
Program menu. Selecting New -
All tracks creates a track playlist
containing all the tracks on the
currently loaded CD and opens
the Program menu. Selecting
New - No tracks creates an empty playlist and opens the
Select to Add menu. Edit and Clear are only displayed
if there is an existing playlist. Edit opens the Edit Program
menu while Clear deletes the existing playlist.
Note: If the desired playlist contains the majority of the
tracks on the CD select “New - All tracks” and delete
the unwanted tracks. Alternatively, if the desired playlist
has just a couple of tracks from the CD select “New - No
tracks” and add the desired tracks.
Note: CD play will stop if the Modify Program menu is
selected while play is underway.
The Program menu displays a
listoftracknumbersintheleft
hand column and their individual
running times in the right hand
column. The order of the track
numbers,toptobottom,reflects
the order in which they will play.
If the menu has opened as a
result of selecting New - All
Tracks the columns will reflect the
tracksequenceofthecurrently
loaded CD. If it has opened as
a result of selecting New - No
Tracks only Select to Addwillbedisplayed.
To delete CD tracks after
selecting New - All Tracks, use
the handset up(5)anddown
(6)keystoscrolltothefirsttrack
tobedeleted(track3inthe
Programmenuillustration)and
press the ok/list key. The Edit
Program menu will open to confirm the deletion.
Modify Program 1/4
4New - All Tracks
New - No Tracks
Edit
Clear
Program [56:22] 3/8
1 02:34
2 04:20
43 03:17
4 07:21
Program [00:00] 1/1
4Select to Add
Edit Program 1/1
4Delete Track 3
42 CD
44:47
12 Track CD
42 CD
01 01:32