Instruction Manual

Information screens give specific messages for a few seconds,
then change automatically to the next screen.
Menu Screens – For details of menu screens, see Section 2.5
Menu.
2.4 Operation
After the initial setup, the NakiRadio is ready for operation .
To select a Mode, press the source keypad button until the desired
mode splash screen is displayed. After a brief moment, the
NakiRadio switches to that mode. See the relevant Mode section
for details on how to use each listening mode.
2.5 Menu navigation
The primary control for moving through menus and options is the
Select dial. Rotate the dial to move up or down inside a menu.
Once the desired option or value is highlighted, CLICK the Select
control. All menus and lists act as loops, such that turning the
control beyond the first or last entry in a menu or list takes you to
the opposite end of the menu or list, i.e. going upwards from the
first entry in a menu will take you to the last option in the menu,
etc.
A “>” appears on the right of the screen if there are more options