Instruction Manual

Auto-update
Auto-update works with data sent over the Internet.
Network uses a time signal sent from the Internet radio portal
when connected to the internet.
1. Select Update from Network or No Update.
2. If you are updating from the network, set your time zone.
3. If your country uses daylight saving, the automatically updated
time from the network may be incorrect by one hour. When daylight
savings are in effect (during the winter), turn on the Daylight
savings option to rectify this.
NakiRadio will auto-update from the selected source when time
information is available.
Manual set
If you set No Update, the wizard now prompts you to set the time
and date manually.
The date and time are displayed as mm-dd-yyyy and hh:mm