Instruction Manual

AM/PM with the first value, mm, active (flashing).
Adjust each value with the Select control.
As each value is set, the next value becomes active and flashes.
3.1.3 Network
NakiRadio is compatible with all common network protocols and
encryption methods, including Wi-Fi Protected Setup (WPS).
To connect the NakiRadio to your network, you need a Wi-Fi
wireless router, together with password key if set. Select WLAN
Region/Country>Wi-Fi network (SSID), and then select a network
from the list.
If the network is open (non-encrypted), NakiRadio connects and
no further details are required; see Completion below.
Standard encrypted network
To enter the network’s key (password), use the Select control to
highlight the next relevant character and press to select each
character in turn. As each character is selected, the key is built up