Instruction Manual

• Push Button >
NakiRadio prompts you to press the connect button on the router,
then press the select control.
• Pin > (code number)
NakiRadio generates an 8-digit code number which you can
enter into the wireless router or access point.
• Skip WPS [Recommended] >
Enter key as for a standard encrypted network, as above. For
more information on setting up a WPS encrypted network, see
your WPS router’s instructions.
On completion
NakiRadio connects to the selected network.
If connection fails, the NakiRadio returns to a previous screen to
try again. To exit the process, use the Menu button
3.2 Other settings
Common settings are covered below.