User's Guide

451-93281-001 SHOUT sp User Guide, Rev B.1

| Quick Start

Iridium airtime services must first be purchased before use. Iridium airtime may be

purchased directly from NAL Research, or from any Iridium certified airtime reseller.

The SHOUT sp can make Iridium Satellite phone calls when there is an active

Iridium Global SIM card inserted, or an activated DISA EMSS SIM card.

The user is encouraged to read the entire manual to learn how to operate the

SHOUT sp as a messaging device. As a tracking device, the user can quickly set up

the SHOUT sp with just a few simple steps shown below. However, a server is

required to receive tracking reports.

1. Turn on the SHOUT sp by pressing the power button for 2 to 3 seconds.

2. The LED will blink rapidly for 10 seconds while the SHOUT sp initiates its boot

sequence.

3. Press the Power button to wake the SHOUT sp and display the home screen.

4. Swipe Up to unlock the SHOUT sp. (Enter a PIN if required.)

5. Tap the Shout icon.

6. Tap the Settings icon.

7. Locate and Tap Tracking in the settings list.

8. Scroll down and tap Remote Message Format in the Tracking list.

9. Tap the desired remote message format to select it from the list.

10. Tap the Back Arrow button at the bottom of the display, two times to return

to the home screen.

11. Tap the Tracking icon

12. Tap Report Rate icon

Select Tracking On

13. Enter the Report Rate in minutes.

14. Press the Update button to accept the changes.

15. The SHOUT sp is now in tracking mode and ready to send position reports. No

further action is required. The unit automatically goes to sleep in between

reports.