Video Game Console User Manual

Page 21
6-3-3-1 Switch Test
1. Select Switch Test from the 'I/O Test' menu. The following screen will
appear on the monitor.
Note:- On entering Switch Test the Skis will be unlocked. Ensure that the
Skis are returned to the locked condition at the end of the test by
entering Motor Test (See 6-3-3-2)
SWITCH TEST
TEST SW ON .................(a)
COIN SW ON .................(b)
SERVICE SW ON .................(c)
R SELECTION BUTTON ON ............(d)
DECISION BUTTON ON ............(e)
L SELECTION BUTTON ON ............(f)
SWING 0000 0000 CENTER .........(g)
EDGE 0000 0000 CENTER .........(h)
L/R SELECT + DECISION : EXIT
2. The word 'ON' will appear next to items (a) to (f) each time the
respective switch is operated.
When the skis are pushed left, 'SWING-CENTRE' will change to 'LEFT'
and 'OK' will appear just before it reaches the extreme left,. When the
skis are pushed right, 'CENTRE' will change to 'RIGHT' and 'OK' will
appear just before it reaches the extreme right. '0000' will increase
when the skis are moved to the right and decrease when they are
moved to the left.
When the skis are tilted, 'EDGE-CENTRE' will change to 'LEFT or
RIGHT' and 'OK' will appear just before they are fully tilted. '0000' will
change as the skis are tilted.
Note: "EDGE" 'OK' will only appear if you stand and
apply weight to the edges of the ski steps.
There is no problem if 'OK' is not displayed
when standing on the steps in the same way
as normal play.
3. If 'OK' is not displayed when the edge is tilted left or right, re-initialize as
described in section 6-4 "Initialization After Replacing Parts".
4. Operate both of the 'Select L/R' buttons and 'Decision' button together
to exit and return to the 'I/O Test' menu screen.