User Guide

Page 68
Socket cap screw
(M3x10)
Socket head screw
(M4x25)
Socket head screw
(M4x10)
Socket head screw
(M4x10)
Gun Body (R)
NF-Gun (DX) PC Board
Gun Body (L)
Lens
Dome nut (M4)
7-7-2 Separating the Gun Body
1. Remove the Play Panel Assy. (See 7-5 page 64)
2. Remove the Gun Assembly. (See 7-7 page 66)
3. Remove the Gun Covers (See 7-7-1 page 67)
4. Remove 40ff socket head screw (M4x10), 4off dome nut (M4). 1off socket
head screw (M4x25), 1off socket cap screw (M3x10) and remove the Gun
Body (R).
Note: When reassembling the Gun Body ensure that the Lens is fitted correctly, (Curved
face of lens faces forward.). Failure to fit the lens correctly will prevent the gun
from working properly.
Note: Always reinitialize the guns if the gun has been removed or replaced.
(see 6-2-3-1 page 46)
Lens
(Curved face to front)