Operators Manual Part No 90500023 Page 1
1. SPECIFICATIONS POWER SUPPLY :- 220/240volts AC MONITOR :degauss. Hantarex 28" Polo Colour Monitor with auto DIMENSIONS :- 790(w) x 1200(d) x 2080(h) WEIGHT :- 175kg. ACCESSORIES :- Keys: (Cash Door) ................. 2 (Coin Door) .................. 2 (Back Door).................. 2 IEC Mains Lead ............................... 1 Operators Manual ............................ 1 Monitor Manual ................................
2. PRECAUTIONS 2-1 Cautions When Installing. This game is designed for indoor use only. The game must not be installed outdoors or under the following conditions:a. In areas directly exposed to sunlight, high humidity, direct water contact, dust, high heat or extreme cold. b. In locations that would present an obstacle in the case of an emergency, i.e. near fire equipment or emergency exits. c. On an unstable surface or subject to floor vibration. 2-2 Cautions when Handling. a.
3. ADJUSTMENTS 3-1 Turning on the Power After installing the machine, turn on the power. The power switch is located above the mains inlet on the rear of the cabinet. 3-2 Switches for Adjustment Open the coin door to find the switches for adjustments, located on the service bracket. 1. Service Switch Press this switch to obtain game credits without incrementing the coin counter. 2. Test Switch Slide this switch "ON" to enter test mode. Test mode allows game testing and the changing of game settings.
3-4 Test Mode 1. Open the coin door for access to the service bracket, then slide the test switch "ON". The "Test Menu Screen" will appear on the monitor display. 2. Operating the 1 Player joystick up or down will step through the items. 3. Pressing the 1 Player Punch button 1 switch will select an item. 4. Operating the 1 Player joystick up or down will change the settings. 5. Pressing the 1 player Punch button 1 switch will store the change. 6.
1P 0000 2P 0000 + + + + X + + + + + + + + X + + + + 3P 0000 4P 0000 + + + + X + + + + + + + + X + + + + SERVICE SWITCH TEST SWITCH DIP 1 DIP 2 COIN 1 COIN 2 COIN 3 COIN 4 + X + + + + + + PRESS R-PUNCH TO EXIT 3-4-2 Sound Test On entering the Sound Test, the following display will appear on the monitor. Pushing the 1 player joystick to the right will make the number step up and pushing the joystick to the left will make the number step down.
3-4-3 Coin Options Note:- The price of play on this machine is set using the DIP switches on the credit board fixed to the coin mech.
3-4-5 Factory Settings ITEM CONTENTS FACTORY SET (1) GAME COST COIN PULSES REQUIRED FOR CREDIT ----- settable 1 - 9 (2) DISCOUNT 50% DISCOUNT FOR CONTINUE ----- YES / NO 1 (3) COIN 1 MECH VALUE NUMBER OF PULSES ON METER ----- settable 1 - 9 1 (4) COIN 2 MECH VALUE NUMBER OF PULSES ON METER ----- settable 1 - 9 1 (5) & (6) NOT USED (7) BONUS COIN EXTRA COIN PULSE AT SPECIFIED COINS IN (8) CREDIT MODE COMMON (Credit common to player 1 & 2) / EACH ONE (Player 1 & 2 seperate) (9) COIN COUN
Cabinet DESCRIPTION PART No.
5.
Page 1
Contents Operators Manual ...................................................................................1 1. SPECIFICATIONS .............................................................................2 2. PRECAUTIONS ................................................................................3 2-1 2-2 2-3 2-4 3. Cautions When Installing. ..........................................................................3 Cautions when Handling. .........................................................
