user manual

Page 102
5. Remove the Gun Side (R) and Grip (R). (See section 7-34 page 99).
6. Disconnect the 2off Fast-on terminals from the Gun Switch.
7. After removing the Gun Switch and Trigger, remove 1off self tapping screw
(M3x8) and remove the Gun Bracket.
8. Remove 1off flange nut (M3) and remove the Pipe Clip and Sleeve (3dia x 8).
9. Separate the Fibre Optic Holder in two, and remove them from the Fibre Optic
Cable. Remove the Gun Harness, including the O Ring, Fibre Optic and Flexible
Hose.
Self Tapping Screw
(M3x8)
Sleeve
(3dia x 8)
Trigger
Gun Harness Assy
Fibre Optic
Fibre Optic
Holder
Pipe Clip
Flange Nut (M3)
Flexible Hose
O Ring
Gun Switch
Fast-on
Terminals
Gun Bracket