user manual

Page 64

7-4 Replacing the Sensor

1. Remove the Camera assy. (see 7-3 page 63)

2. Remove 2off pozi head screws (M2.5x14), with flat and spring washers, and

remove the Sensor.

3. Reassemble in reverse order.

Note: Check the direction of the interruption sensor when reinstalling. If the sensor is

installed facing the wrong way, a message will appear on the screen and the

game cannot start.

Camera unit

Interruption sensor (note direction)

Pozi head screw (M2.5

14)

(with flat and spring washers)