user manual

Page 70
Trigger switch
(Yellow) N.O. terminal
(Black) COM. terminal
7-7-3 Replacing the Trigger Switch
1. Remove the Switch Panel Assy. (see 7-5 page 65)
2. Remove the Gun Assembly. (See 7-7 page 67)
3. Remove the Gun Covers (See 7-7-1 page 68)
4. Seperate the Gun Body. (See 7-7-2 page 69)
5. Replace the Trigger Microswitch.
6. Reassemble in reverse order.
Note: Ensure that the correct wires are fitted to the correct switch terminals when
refitting the Trigger Microswitch.
Note: Always reinitialize the guns if the guns has been removed or replaced.
(see 6-2-3-1 page 47)