SOUL CALIBUR ll Game PCB Kit Connections and Adjustments Part No 90500138 Issue 1
Page 2
NOTICE is a term to describe a copyright protection technology created by Sony Group. This mark does not necessarily guarantee compatibily with other products bearing the “MagicGate” trademark. is a trademark of Sony Corporation. est une terme décrivant une technique de protection de copyright créée ne garantit pas nécessairement de compatabilté avec par Sony Group. d’autres produits portant la marque de commerce “MagicGate” est une marque de commerce de Sony Corporation.
Contents KIT CONTENTS ............................................................................................................... 5 1. SPECIFICATIONS .................................................................................................... 7 2. CABINET CONNECTIONS (Standard Jamma) .......................................................... 7 3. CABINET CONNECTIONS (JVS Standard) ............................................................. 11 4. FITTING THE DONGLE & MEMORY CARD ........
KIT CONTENTS Description Part No Quantity XSC2-PCB 1 DVD Rom CD Disc XSC2-CDROM 1 Jamma (B) PCB XTEK4-JAMMA 1 Soul Calibur 2 PCB Rack Assy Power Supply Loom 1 RGB Video Loom 1 RCA (Phono) Audio Loom 1 Data Loom 1 Rack Assy to Jamma (B) PCB connecting cables Amp EI connectors to 48way Edge Adaptor Loom 69200067 1 Amp EI connectors with Flying Leads Loom 69200066 1 Button Decals 1 se t Instruction Card 1 Move List Card 1 Title Board 1 Soul Calibur 2 Promotional Poster 1 T
1. SPECIFICATIONS COMPATIBILITY: JAMMA STANDARD (with JAMMA (B) PCB) JAMMA VIDEO STANDARD (JVS) PCB INPUT POWER: +5v (±5%) @ 7A (Min), +12v (±5%) @ 2A (Min) OPERATING ENVIRONMENT: Temperature Humidity MONITOR ORIENTATION Orientation Horizontal (Landscape) Horizontal Frequency 15kHz / 31kHz (selectable) Scanning retrace 15.75 kHz Non-interlace / Interlace +5ºC to +45ºC 10% to 85% (no condensation) AND SIGNAL: 31.5 kHz Non-interlace (fixed) RGB output level At 15 kHZ 0.7V p-p / 3.
2.
The JAMMA (B) PCB is connected to the game cabinet with a 56way Edge Connector (standard JAMMA) and 4 and 10way AMP EI Connectors. JAMMA (B) PCB JAMMA 56way Connector 10way AMP EI Connector 4way AMP EI Connector Note: Supplied in the Kit is an Amp EI connector to 48way extender card adaptor loom for cabinets with an existing 48way connector, and an AMP EI connector with flying leads loom for cabinets without a 48way connection. 4 and 10way AMP EI Connector with 48way Extender Card Part No.
Connections for Standard JAMMA Cabinet SOUL CALIBUR 2 SOUL CALIBUR 2 JAMMA 56way Edge Connector Solder Side Terminal No Component Side 10way AMP EI Connector GND A 1 GND Pin No GND B 2 GND 1 +5volt C 3 +5volt 2 +5volt D 4 +5volt 3 E 5 +12volt F 6 +12volt 5 Polarizing Key G 7 Polarizing Key 6 H 8 J 9 L Speaker (-) K 10 L Speaker (+) Audio (-) (mono) L 11 Audio (+) (mono) Video GREEN M 12 Video RED Video SYNC N 13 Video BLUE SERVICE P 14 Video GND
Adaptor for Earlier Tekken Series Cabinets with 48way Edge Connector (Part No 69200067) PREVIOUS CAB INETS 48way Extension Connector Solder Side 4w AMP EI pin 4 ) R Speaker (- Polarizing Key 10w AMP EI pin 4 10w AMP EI pin 8 P42 Button switch P41 Button switch Termoinal N Compoenent Sid A 24 B 24 A 23 B 23 A 22 B 22 A 21 B 21 A 20 B 20 A 19 B 19 A 18 B 18 A71 B 17 A 16 B 16 A 15 B 15 GND 10w AM0P EI pin 1 A 14 B 14 GND 10w AM0P EI pin 1 A 13 B 13 A 12 B 12 A11 B11 A
3.
4. FITTING THE DONGLE & MEMORY CARD The dongle and memory card included in this kit is limited to this game only. DO NOT insert this Dongle in other games. Inserting the Dongle in other games may cause damage. Ensure that the power is switched OFF before inserting the Dongle. Dongle cover Pozi head screw (M3x10) 1. Remove 1off pozi head screw (M3x10) and remove the Dongle Cover. 2. Fit the Dongle to the left hand connector. 3. Fit the Memory Card to the right hand connector.
5. FITTING THE CD-ROM DISC • The CD-ROM Disc must be inserted with the power switched on. To prevent an electric shock, accident or injury, do not touch any parts other than those specified below. • The supplied CD-ROM Disc is designed exclusively for this product. Never use the CD-ROM Disc in any other product. Do not insert other CD-ROM Discs in the CD-ROM drive of this game. • The CD-ROM tray retracts automatically after 10 seconds. 1. Press the eject button of the CD-ROM drive to open the tray.
2. Place the CD-ROM Disc on to the tray, ensuring that the label side (printed surface) is facing away from the Tray. CD-ROM DISC Ensure that the CD-ROM Disc is securely placed on the tray, with the label side facing away from the tray Tray 3. Press the Eject button to retract the Tray in to the unit. 4. Switch the power OFF, wait approx 10 seconds then switch the game back ON.
ADJUSTMENTS AND SETTINGS The Game PC Board Assy is fitted with 4 Option Switches. Option Switches 2 3 NO 1 4 6. ON OFF The JAMMA (B) PCB has the Volume Control fitted. JAMMA (B) PCB Volume Control 6-1 Option Switches Switch 1 is used to change between Test Mode and Game Mode. ON: Test Mode OFF: Game Mode Switch 2 is used to set the output level of the video signal. 31kHz ON: 0.7V p-p OFF: 0.7V p-p 15kHz ON: 0.7V p-p OFF: 3.
Test Mode To enter Test Mode set the Test switch in the cabinet (if fitted) to ON, or if no Test switch is fitted to the cabinet, set Option switch 1 ON 2 3 NO 1 4 6-2 Note: The test mode is activated only when the cabinet Test switch or Option switch 1 is moved from OFF to ON. If the game is switched on with either switch in the ON position the Test Mode will not be activated. The switch must be switched OFF and then ON to enter the test mode.
6-2-1 Display Test This test allows the following checks and adjustments to be made. n Colour Edit Adjust contrast and brightness of each colour to match video output from the PCB to the Monitor. Note: This adjustment should only be made if the correct picture quality cannot be achieved by using the normal monitor adjustments. n Convergence Check and adjust the size, position and distortion of the screen image. n Interlace Check Switches between interlaced and non-interlaced display.
6-2-2 Colour Edit 1 Ensure that the Colour Edit Adjustment Box is showing. (Press P1 Button 3 if the Adjustment box is not displayed. 2. Use the Joystick UP/DOWN to step to the required adjustment. (Contrast, Brightness (red), Brightness (green), Brightness (blue)). 3. Use the Joystick LEFT/RIGHT to adjust the value. 3.
6-2-4 Interlace Interlace Mode: This mode provides more detailed and smoother graphics than the non-interlaced mode. This is achieved by shifting the picture display a half line in the vertical direction every other frame scan, so doubling the vertical resolution without changing the horizontal/vertical frequency. Non-Interlaced Mode: Use this display if the interlace mode results in flicker over the entire screen display.
6-2-5 Input Test (switch test) Select Input Test from the Main Test Menu. The following screen is displayed.
6-2-6 1. Game Options Select Game Options from the Main Test Menu. The following screen is displayed.
6-2-7 1. Coin Options Select Coin Options from the Main Test Menu. The following screen is displayed. COIN OPTIONS Defaults in Green (a) (b) > Start cost : Continue cost : (c) 1 COIN to START 1 COIN to CONTINUE (d) Coin chute 1 mechanical value : 1coin count as 1 COIN Coin chute 2 mechanical value : 1coin count as 1 COIN (e) (f) (g) Credit mode : Coin counter : Free play : common 1 counter NO Modify : P1-Left/Right Exit : P1-Start 2. Use the Joystick UP/DOWN to step to the required adjustment.
6-2-8 Sound Test 1. Select Sound Test from the Main Test Menu. The following screen is displayed. SOUND TEST POSITION:off Displays which speaker is playing SPEAKER:stereo Displays monaural/stereo setting Check Sound Select SOUND mode EXIT : P1-Button 1 : P1-Left / Right : P1-Start How to activate test sound How to change stereo/monaural setting How to return to test menu screen 2. Press 1P Button 1 to conduct a stereo check.
6-2-10 A. D. S - (Bookkeeping) This screen is used to display bookkeeping data such as: Total Coins, Game Ratios and Playing Times etc. 1. Select Bookkeeping from the Main Test Menu and press P1 Button 1 to display the information. 2. Press P1 Start Button to return to the Main Test Menu screen. 6-2-11 1. Data Clear Select Data Clear from the Main Test Menu and press P1 Button 1. The following screen is displayed.
Page 25
Copies of Namco Game Manuals can be downloaded from our website: www.namco.co.uk They are located under Components Distribution For all Parts or Technical Support contact: Brent Electronic, Namco House, Units 5-8, Acton Park Estate, The Vale, London. W3 7QE www.brentelectronic.co.