user manual

Page 61
8-8 Replacing the Fluorescent Tube and Display Lamps
1. Remove 2off security screw (M5x25) and remove the Acrylic Retaining Bracket.
2. Remove the Display Acrylic.
3. Replace the Fluorescent Tube or Starter.
4. Remove the Wedge Lamps by pulling them straight out from the holder, and
replacing them by pushing them into the holder.
5. Reassemble in reverse order.
Fluorescent Tube
Starte
r
Wedge Lamps
(12v 5w)
Lamp Holder
Security screw
(M5x25)
Acrylic Retaining Brkt
Display
Acrylic