User's Manual
XGPS150
10
steps above in Pairing the XGPS150 with an
Android device.
• Download and install the Bluetooth GPS app
from the Android Marketplace.
• Open the Bluetooth GPS app and select the
XGPS150 from the pull-down menu on the Main
tab.
• Check the box next to Enable Mock GPS
Provider.
• Tap the Connect button. Your Android device
will connect to the XGPS150 and begin stream-
ing location data to apps on your device. The
blue Bluetooth indicator on the XGPS150 will
illuminate without blinking.
Pairing the XGPS150 with a Blackberry device
(NOTE: these instructions were written using a
Blackberry Storm 9550 and may be different if you
are using a different model of Blackberry smart
phone.)
• Make sure the mode switch on the XGPS150
is set correctly for your device (see Setup).
• Turn on the XGPS150. The blue Bluetooth
light on the XGPS150 will begin to blink slowly
(about once per second).
• From the Blackberry main menu go to:
Manage Connections