User's Manual

About the WIRELESS HEADSET
The WIRELESS HEADSET is designed to be used with the PLAYSTATION®3 system.
It will also work with most Bluetooth-enabled mobile phones and audio devices.
Note: Before you use your headset for the first time, you must fully charge it and "pair” it
with the PS3™ system.
There are four buttons on the WIRELESS HEADSET:
1. Power button
2. Volume + button
3. Volume - button
4. Mic muting button
***Image of Bluetooth Headset / Cradle with call outs to its buttons and functions –
This image still needs to be labeled ***
Charging the headset
Follow the instructions below to charge the headset.
1. Check that the PS3™ system is turned on.
2. Insert the mini-B connector of the supplied USB cable into the charging cradle, and
insert the other end of the cable into a USB connector on the PS3™ system.
3. Place the WIRELESS HEADSET into the charging cradle.
The power indicator on the headset lights up and remains lit in solid red for 2 seconds
and then flashes to indicate that the headset is charging. Charging is complete when
the indicator is lit solid red.
***Images of USB cable being plugged into Cradle and PS3, as well as USB cable
being plugged into Headset and PS3. These pictures still need to be labeled***