User's Manual

You can also charge the headset by connecting it directly to the PS3(TM) system using a
USB cable.
Note: The headset will be fully charged in approximately three hours.
Pairing the headset with the PS3™ system
Pairing with the PS3™ system using a USB cable
Note: Pairing with the PS3™ system using a USB cable may require updating your
PS3™ system software to the latest version. This also equips your headset with additional
features. Note that these features will only be added if you pair your headset with the
PS3™ system using a USB cable. If your headset is paired using Bluetooth discovery
mode, none of these additional features will be available on your headset. In this case,
you can only use your headset in the same way as a standard Bluetooth headset.
1. Check that the PS3™ system is turned on.
2. Insert the mini-B connector of the supplied USB cable directly into the USB
connector on your headset, and insert the other end of the cable into a USB
connector on the PS3™ system.
The power indicator on the headset lights up in solid green for two seconds to
indicate that the headset and the PS3™ system have been successfully paired. If