User's Manual

pairing is not successful or times out, the headset’s power indicator will remain lit in
solid red for two seconds.
Pairing with the PS3™ system in Bluetooth discovery mode
1. Press and hold down the power button on your headset until the power indicator
flashes alternately in green and red, indicating that the headset is in Bluetooth
discovery mode.
2. On your PS3™ system’s home menu, go to @ (Settings) > @ (Accessory Settings) >
[Register Bluetooth® Device].
3. Select [Register Headset/Microphone/Headphones].
4. Select [Start Scanning].
Your PS3™ system begins to scan for the headset.
5. Select your headset from the list of devices that is displayed. When prompted for a
pass key, enter “0000”.
Your headset is now paired with the PS3™ system.
Pairing the headset with mobile phones
1. Press and hold down the power button on your headset until the power indicator
flashes alternately in green and red, indicating that the headset is in Bluetooth
discovery mode.
2. Turn on the Bluetooth feature on your mobile phone and start scanning for the
headset. See your mobile phone’s user guide for more information
3. Select your headset from the list of devices that is displayed. When prompted for a
pass key, enter “0000”.
Your headset is now paired with the mobile phone.
Turning the headset on and off
To turn on your headset:
Press and hold down the power button for about three seconds. The power indicator will
be lit in solid green to indicate that the headset is turned on.
To turn off your headset:
Press and hold down the power button for at least five seconds until the power indicator
begins to flash in green to indicate that the headset is turning off.
***Image of Bluetooth Headset with focus on Power Button – The image needs to
labeled and the green LED needs to shown lit up***