User's Manual

130
Network setting
Htek IP Phone supports IPv4, IPv6, IPv4&IPv6.They have three mode of Network: DHCP, Static, and
PPPoE. The default mode is DHCP, it will obtain IP address and other information automatically.
If your phone cannot contact a DHCP server for any reason, you need to configure a static IP address
manually.
When switch DHCP, Static IP Address and PPPoE to each other, or change the Static IP on webpage, it
will show the warning of restart as following.
IPv4
If you set IP Mode to IPv4,IP phone will use IPv4 address. IPv4 has three network modes: DHCP, Static,
and PPPoE.
To configure IPv4 via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin)→ Network→ WAN Port→ IP Port
Mode.
2. Press and or Switch soft key to change the IP Port Mode.
3. Press or Save soft key to save the configuration.
To configure IPv4 via Web interface:
1. Click Network→ Basic→ Internet Port
2. Select IPv4 for Internet Port.
3. Click for the setting.