User's Manual

133
To configure IPv6 via Web interface:
1. Click Network→ Basic→ Internet Port
2. Select IPv6 for Internet Port.
3. Click for the setting.
To configure DHCP via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin)→ Network→ WAN Port→ IPv6→
DHCP mode.
2. Click Save and the pop-up box shows "System will reboot, Are you sure?".
To configure a static IP address via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin)→ Network→ WAN Port→ IPv6→
Static mode.
2. Enter the parameters: IP, IPV6 Prefix, Gateway, Pri.DNS(primary DNS), sec.DNS (second DNS) in
the corresponding fields.
3. Click Save and the pop-up box shows "System will reboot, Are you sure?".