User's Manual

134
To configure Network via Web interface:
1. Click Network→ Basic→ IPv6 Setting
2. Select the desired Type: DHCP, Static IP Address.
3. Fill in the required fields.
4. Click and the pop-up box shows "System will reboot, Are you sure?".
IPv4&IPv6
If you set IP Mode to IPv4&IPv6, IP phone will support both IPv4 and IPv6 address. The settings of
DHCP, Static, and PPPoE are same as above.
To configure IPv4&IPv6 via Phone interface:
1. Press Menu→ Settings→ Advanced Setting (password: admin)→ Network→ WAN Port→ IP Port
Mode.
2. Press and to change the IP Port Mode.
3. Press or Save soft key to save the configuration.