User's Manual

138
System Log
To download system log via Web interface:
1. Click Management→ Configuration
2. Select the Syslog Level
3. Click of the System Log.
4. Then you’ll get a txt file: syslog.txt.
.
Upgrade
To upgrade via HTTP, the “Management”→ “Auto Provision”→ “Firmware Upgrade”→ “Upgrade Mode”
field needs to be set to HTTP, respectively. “Firmware Server Path” needs to be set to a valid URL of a
HTTP server, server name can be in either FQDN or IP address format. Here are examples of some
valid URL.
e.g. firmware.mycompany.com:5688/Htek
e.g. www.mycompany.com:5688/fm/Htek
e.g. 218.2.83.110
Instructions for firmware upgrade via HTTP:
(1) End users can choose to download the free HTTP server from http://httpd.apache.org/ or use
Microsoft IIS web server. Then setup HTTP server.
(2) Unzip the firmware file and put all of them under the root/fm directory of the HTTP server.
(3) Visit “http://192.168.0.254/fm/fw520U.rom” on localhost by browser to verify the HTTP Server. If
visiting “http://192.168.0.254/fm/fw520U.rom” on another computer and it is not prompted to download
fw520U.rom file on this computer, please check if the firewall is on or off (Suggest you turn off the
firewall).
To configure the server path via Web interface:
1. Click Management→ Auto Provision