User's Manual

100
Auto Logout Time
Set the Web login timeout.
1. Login webpage, and click Setting→ Preference
2. Set number 1~5000 min for Auto Logout Time.
3. Click for the setting.
Reboot in Talking
This function is to allow reboot during the calls or not. When this function is disabled, reboot will not be
executed immediately during the call, but will be executed after the call ends. When this function is
enabled, reboot will be executed immediately during the call.
1. Login webpage, and click Setting→ Preference
2. Set Enable or Disable for Reboot in Talking.
3. Click for the setting.
Detect IP Conflict
The IP phone will detect whether there is an IP conflict after obtaining the IP address. If so, it will
prompt the IP conflict in the LCD pop-up box; you can select “Cancel” to ignore it or “Reboot” to let
the phone re-request an IP address.
1. Login webpage, and click Setting→ Preference
2. Set Enable or Disable for Detect IP Conflict.
3. Click for the setting.
Redial Mode
Call redial has two ways:
(1) To redial the last placed call from the IP Phone.
(2) To redial the call from all calls list.
1. Login webpage, and click Setting→ Preference
2. Set Direct Mode or Select Mode for Redial Mode.
3. Click for the setting.