User's Manual

106
To Select the PC Port via Web interface:
1. Click Network→ PC Port
2. Select As Bridge/Connect to Expansion Module.
3. Click and then click , the phone will reboot automatically.
Note: The As Bridge mode is selected by default, and the “Connect to Expansion
Module” mode is only required when the phone is connected to the expansion
module.
System setting
Factory Reset
To set Factory Reset via Phone interface
1. Press Menu→ Settings→ Advanced Setting (default password: admin)→ Phone Setting→ Factory
Reset
2. Press OK soft key in the warning page.
To set Factory Reset via Web interface
1. Click Management→ Upgrade
2. Click and then confirm the setting.
Pcap Feature
To use Pcap feature via Web interface:
1. Click Management→ Tools
2. Click and then operation the phone
3. When finishing the operation, click and then click .
4. Then you’ll get the Pcap captures.