User's Manual

32
You can also use Ping via the web user interface:
1. Click Network→Diagnostics
2. Choose method Ping
3. Fill in IP Addr
4. Click
Traceroute
Traceroute measures how long it takes by sending small packets to the destination device until it
returns. By default, traceroute tests each device on a path three times. The output results include the
time (ms) of each test and the device name (if any) and its IP address.
How to use Traceroute function:
1. Press soft key Menu→Features
2. Press and to choose diagnostics
3. Enter Network→Trace Route
4. Fill in Tracert IP or URL
5. Press soft key Start
You can also use Traceroute via the web user interface:
1. Click Network→Diagnostics
2. Choose method Traceroute
3. Fill in IP Addr
4. Click and
Power Saving
The power saving feature is used to turn off the backlight to conserve energy. The phone enters power
saving mode after it has been idle for a certain period of time. Image persistence may be caused on
LCD if Power Saving is disabled.
Office Hour: The period of time you use the phone frequently. Time from 0 o'clock to 23 o'clock.
Idle Timeout: specify the period of time before the IP phone enters the power-saving mode.
You can specify the following three types of idle timeout
Office Hour Idle TimeOut: It's the time of phone waits in the idle state before the phone enters power
saving mode during the office hours. (Integer from 1 to 960 minutes)
Off Hour Idle TimeOut: It's the time of phone waits in the idle state before the phone enters power
saving mode during the non-office hours. (Integer from 1 to 10 minutes)
User Input Extension Idle TimeOut: It's the minimum time of phone waits in the idle state after using