User's Manual

89
2. Choose the Screen Time Out as 1 min or 2/5/10/30 minute and choose the ScreenSaver Type as
time & logo.
3. Enter the desired value in the Text Logo field.
4. Click to save the configuration.
To wake up screen saver via Web interface:
1. Setting→ Preference
2. Choose Dial First Digit: Screensaver Wakes up or Screensaver Wakes up and Dial
3. Click to save the configuration.
Note:
1. The upload Photo size should be less than 100KB, name length should be less
than 48 characters, and the File name should be letters, numbers, or underline '_'
and photo number should be less than 9.
2. The default screensaver photos cannot be deleted.
3. You can only upload screen photos in format of '.bmp' and '.jpg'.
Backlight
To set Backlight via Web interface:
1. Click Setting→ Preference
2. Enter the time for Backlight time (In seconds).
The default is 0, which means Backlight is always on.
3. Click to save the configuration.
Note:
Backlight Time refers to the time into the backlight.
Time and Date
Time and date is displayed on the idle page, and it can be set automatically by SNTP server or
manually by manual setting.
To configure the time and Date by SNTP setting via Phone interface
1. Press Menu→ Settings→ Basic Setting→ Time & Date→ SNTP Settings
2. Press or or Switch soft key or press and press and to change the Time zone.
3. Fill in the NTP Server1, NTP Server2, and select the mode of Daylight Saving.
4. Press Save soft key to save the configuration.
To configure time and date manually via Phone interface
1. To press Menu→ Settings→ Basic Setting→ Time & Date→ Manual