Midas-926 Gateway Light Model: Midas-926.
ATTENTION Contact us at Twitter. (Scan this QR code) Official Discord channel: https://discord.gg/yFSTWJrA6R PLEASE DO NOT RETURN THIS PRODUCT UNTIL YOU CONTACTED US. IMPORTANT. Contact customer service if you have any questions regarding assembly or proper operation of the device. Email us at: support@midaswirelss.io Call us at: (+86) 21-52685889 Time: 8:00 a.m. - 5:00 p.m.
SAFETY INSTRUCTIONS 1. To ensure that you can use this LoRaWan gateway safely, reliably and stablely, please read the important notices below and all the operation instructions prior to usage. . 2.Please join Midas discord channel and follow Midas official twitter and you can get help from professional technical support and advices from the community. It is also useful to read all QnAs on Midas official website. Important Notes a) This product can only be used indoors.
DESIGN ILLUSTRATION r
NO. Name 1 System indication LED 2 LoRa LED 3 WLAN LED 4 Ethernet LED 5 Antenna port 6 Reset switch 7 Ethernet port 8 DC power port Product dimension: 155mm (L) * 155mm (W) * 41mm (H ) Lora Antenna: Model name glue stick antenna Frequency Range (MHz) 902-928MHZ V.S.W.R ≤ 2.
ASSEMBLY INSTRUCTIONS Please confirm whether the parts are complete before installation. Parts list NO. Name Quantity 1 Midas-926 Gateway Light Device 1 2 Antenna 1 3 5V DC-DC adapter 1 4 Pin 1 Plug in the provided 5V DC-DC power adapter into an outlet and screw in the provided antenna on the back of the Midas-926 Gateway Light. Connect the device using Ethernet cable with your router and make sure the internet access is avaible.
PRODUCT FEATURES 1. This is a LoRaWan Gateway that integrates all the Helium Light Hotspot functions. 2. Frequency band: US915. 3. Transmission mode: semi-duplex. 4. Semtech SX1302 based LoRa concentrator supporting CN/US/EU bands 5. MIPS processor @ 580MHz 6. 128MB DDR2 RAM 7. 16MB Flash 8. ATECC608 chip for swarm key 9. WiFi(2.4GHz) IEEE 802.11b/g/n 10. Status indication LEDs 11. Voltage 5V 12.
MIDAS STARTER APP INSTRUCTION This Midas-926 Gateway Light can work with Midas Starter App so you can easily use it to join Helium network. To get started, make sure you have the Midas Starter App downloaded to your mobile device and your smart phone meets the requirement, for iOS (iOS version 13 and above) and Android (OS 8 and above). Once you have the app downloaded and a Helium wallet created, unbox the Midas-926 Gateway Light and get ready! 1. In the Midas Starter App, go to Hotspots and press +. 2.
FCC WARNING Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
IC WARNING This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
