User's Manual

ZDC ZA-5000-D User's Manual V2.3.2
Chapter 3 Basic configuration
Page 21
Notice:
Notice:
Figure 13 Wireless1 WDS Settings
Figure 14 Wireless2 WDS Settings
You should set the two Access Points different IP addresses in order to expediently manage
them.
3. After above configuration, to confirm the right connection of wireless network, you can use
“ping” program. At the local notebook computer (192.168.0.1), ping 192.168.0.2, ping
192.168.0.3.
If the device does not work or the ping is timed out, please take a reference to chapter
“
Troubleshooting”.
4. Now the Access Points have normally worked. You can change settings account to your need.
The detail about changing settings is in above chapter. After all, you should make sure than
notebook1, notebook 2 and notebook3 are connecting well.
The both Access Points settings of Country/Region, Channel/Frequency and Security should
be the same.
5. Use “Link Test” to test the signal strengthens of wireless network. At first, open “WDS