User's Manual

ZDC ZA-5000 User's Manual V2.2.5
Chapter 3 Basic configuration
Page 15
as the subnet mask.
DHCP Client: AP can get IP settings from DHCP Server.
z Spanning Tree
If open this function, Spanning Tree Protocol can detect the network loop link and avoid
broadcast storm.
Set the Basic Wireless Parameters
Figure 11 Wireless Settings
z Operating Mode
AP mode: This mode is used to build infrastructure network which allowing station
connection.
Bridge mode: This mode is used to build WDS network which allowing other wireless
bridge connection.
AP + Bridge Mode: This mode allows both station and wireless bridge connection.
z Channel/Frequency
Select the channel that you plan to use.
USA Use Only