User's Manual

ZDC ZA-5000 User's Manual V2.2.5
Chapter 2 Hardware Installation
Page 8
Notice:
Warning：
7. Connect the Access Point to the ground via ground connection which is beside the RJ-45 port.
Thus all, the hardware installation is completed.
While there is build-in buzzer inside ZA-5000, users can adjust antenna by the buzzer.
Before adjusting antenna, please do not tighten waterproof joint, otherwise you can possibly
not hear sound of buzzer.
There is a plastic film covering the build-in antenna. Please tear this film while using
ZA-5000.
Please confirm ground connection of the Access Point.
Please confirm ground connection of the STP cable, and traverse an EMI suppression
ferrite ring core.
Antenna Installation
There is an inner antenna inside ZA-5000-I which no need of external antenna