User's Manual

ZG-760E User Manual

The following table describes the parameters of this page.

Field Description

General

Connection Setting

WirelessMode It contains the wireless mode of the adapter. It is

chosen by the adapter automatically.

Channel The network channel. It is chosen by the adapter

automatically.

Tx Rate You can choose the transmission rate from the

drop-down list.

SSID You can enter the SSID of the connected AP.

Normally, it is chosen by the adapter

automatically.

Network Type You can choose Infrastructure or Ad-Hoc.

= If the wireless adapter connects to the AP,

choose Infrastructure.

= If several wireless adapters are

interconnected, choose Ad-Hoc.

Authentication Choose the authentication of the AP that is

connected to the adapter. Auto indicates that the

AP does not set the security mechanism.

Encryption It displays the encryption type that the driver is

using.

= If you choose Open System or Shared-Key

System as authentication, there are two

types of encryption: WEP and None.

= If you choose WPA, WPA-PSK, WPA2, or

WPA2-PSK as authentication, there are two

types of encryption: TKIP and AES.

Encryption Setting

Set the AP encryption to WEP, and then click WEP Encryption Key in the

Encryption Setting field. The page shown in the following figure appears.