User's Manual

4、Safety Precautions
1）Please open the package to check for damage caused in transit, if damaged please do not use
and contact place of purchase or manufacturer as soon as possible.
2）Please do not use a power cord with damaged insulation, do not unplug too hard or drag the
power cord directly.
3）Make sure that the power supply voltage used matches the voltage designated by the light
before installation.
4）Please turn the light off when it is not in use or before cleaning.
5）Please keep the light safely stored and away from children.
5、Notice
1）Please take off the COB protective cap before using.
2）Please do not look directly at the emitter when the light is on .
3）Please wait 10 seconds to turn off the light fixture after any parameter setting in order to save
it for future use.
4）Please do not place any objects on the light emitter or allow liquid to flow inside the fixture or
the emitter.
5）Please do not place the light fixure near the flammable substances like alcohol or gasoline.
6）Please wipe off debris or dirt by using a cloth with clean water or neutral cleanser when
cleaning the light.
7）The fixture should be used in dry and ventilated place and avoid being used in damp, dusty or
overheated environment, also make sure the fan and the vents are not blocked or obstructed.
8）Any attempt to repair the fixture by yourself will void warranty, disasembling and repair can
only be allowed when trained professionals are involved under strict protocal regulated in this
manual.
9）For optimal cooling of the fixture, the vents should not be covered when using, or might result
in damaging the equipment. The temperature on the fixture surface is high when using for a long
time, please caution to prevent burns and scalds.