User's Manual

User manual

1、Model and Product name: PavoTube Ⅱ 30C RGBWW LED Tube Light

2、Technical data:

Input: AC 100-240V 50/60Hz

Output: DC 15V/4A Max.60W

Color Temperature: 2700-7500K CRI: 97 TLCI: 98

3、2.4G、Bluetooth Remote Control

PavoTube Ⅱ 30C can be remotely controlled by 2.4G remote controller and by NANLINK APP

via the WS-TB-1 transmitter box. It also has built-in bluetooth and can be controlled via

bluetooth.

Note:

1) 2.4G remote controller and transmitter box are sold separately.

2) The fixture supports the 2.4G wireless protocol V1.0 and V2.0. The fixture should be set in

V2.0 while using WS-RC-C1 or WS-RC-C2 remote controller, set in V1.0 while using other remote

controllers.

4、Safety Precautions

1) Please open the package to check for damage caused in transit, if damaged please do not use

and contact place of purchase or manufacturer as soon as possible.

2) Please do not use a power cord with damaged insulation, do not unplug too hard or drag the

power cord directly.

3) Make sure that the power supply voltage used matches the voltage designated by the light

before installation.

4) Please turn the light off when it is not in use or before cleaning.

5) Please keep the light safely stored and away from children.

PAGE 1
User manual 1、Model and Product name: PavoTube Ⅱ 30C 2、Technical data: Input: AC 100-240V 50/60Hz Output: DC 15V/4A Max.60W Color Temperature: 2700-7500K CRI: 97 RGBWW LED Tube Light TLCI: 98 3、2.4G、Bluetooth Remote Control PavoTube Ⅱ 30C can be remotely controlled by 2.4G remote controller and by NANLINK APP via the WS-TB-1 transmitter box. It also has built-in bluetooth and can be controlled via bluetooth. Note: 1) 2.4G remote controller and transmitter box are sold separately.
PAGE 2
5、Notice 1) Please do not place any object on the fixture or allow liquid to flow inside the fixture. 2) Please do not place the fixture near any flammable or volatile substances like alcohol or gasoline. 3) Please do not use strong detergent for cleaning. Please wipe off the dirt by using a cloth with neutral cleanser when cleaning the fixture. 4) Please set up the fixture in a dry and well-ventilated place. Please do not use it in any humid, dusty or overheated environment.