Owner's Manual

Important Installation Tips
& =---------...--------------..
i{J lx ♦ ~ 42W
\
/ lx ♦ ~ SOOx
Make sure you hove enough PSUs for your layout. NOTE: Each standard PSU
supports up to 42W and each Controller supports up to 500 panels. Use our PSU
calculator at nanoleaf .me/myshapes.
& -------=~-.....
0o .
To mount, apply strong pressure
in a circular motion to the center of
the panel for 30 seconds.
♦
The Controller and Power
Supply con be connected to any
panel 1n your setup.
& --------,
Before mounting your panels,
clean your surface to be free of
dust, moisture and oil
y )
i V
.1
Tope is NOT suitable for textured,
porous. popcorn and ceiling surfaces
(le wallpaper or brick walls).