Specifications

Remove the 5.25 inch cover by pulling the

lateral  l ng lever cau ously towards you

and take out the cover

Then loosen the lock on both sides by

dragging the black slider backwards (1).

Then slide the drive into the desired

posi on.

Lock the holder by pushing the slider back

to its original posi on (2).

3.2 U lizing the external 3.5 inch bay

If you for example desire to place a 3.5 inch card reader, you can use the internal adaptor for

this purpose. Please remove the 5.25 inch cover  rst. Open the two quick release of the 5.25

inch bay and remove the moun ng frame. Then a ach the card reader in the frame, as shown

below.

Then place the frame with the card reader

back into the slot and lock the quick release.

Finally, a ach the included 3.5 inch front

panel carefully on top of the card reader.

Alterna vely, the adaptor can be used for the installa on of an addi onal 3.5 inch hard drive.