USER MANUAL Smart Arm Blood Pressure Monitor Simple Operation High Measuring Accuracy English Model Name：BP4.
1 English Smart Arm Blood Pressure Meter NantCare LLC, 2929 N 44th Street Phoenix, Arizona, 85018-7239 - USA 1-855-NANTCARE - Email: support@nantcare.com w w w. n a n t c a r e .
1 Table of Contents 4 Troubleshooting P 12 1.1 Introduction P4 4.1 Error Indicators P 12 1.2 Intended Use P4 4.2 Troubleshooting tips P 13 1.3 Safety Information P 4-5 5 Warranty P 14 1.3.1 Operating the device - WARNINGS P5 6 Specifications P 15-16 1.3.2 Cautions P6 7 Manufacturer P 16 1.4 Before taking a measurement P6 2 Operating Instructions P7 2.1 Know your NantLife Blood Pressure Meter P7 2.2 Unit Display P7 2.3 Display symbols P8 2.
1.1 Introduction 1.2 Intended Use Thank you for purchasing the NantLife Smart Blood Pressure Monitor. Your new digital blood pressure meter uses the oscillometric method of blood pressure measurement. This means the monitor detects your blood’s movement through your brachial artery and converts the movements into digital reading.
in addition, please note: • • • • • • • • • If you suffer from heartbeat irregularities, you should consult your doctor about whether blood pressure monitoring with the NantLife blood pressure meter is appropriate for you. Selfdiagnosis and treatment using measured results may be dangerous. Follow the instructions of your physician or licensed healthcare provider. Please also consult your doctor if you are taking anticoagulants (e.g.
1.3.2 Cautions • • • • Excessive user movement may cause inaccurate readings All NantLife devices are designed to be compliant with rules and regulations in locations they are sold and are labeled as required. Any changes or modifications to NantLife equipment, not expressly approved by NantLife void the user’s authority to operate the device. Autoclaving, ethylene oxide sterilizing, or immersing the blood pressure meter in liquid may cause inaccurate measurements.
2.1 Know your NantLife Blood Pressure Monitor 2 Operating Instructions Removable Top Cover 1 Air Jack - Air Plug Button Cuff Tube LCD display Note: the battery compartment is located at the bottom of the Blood Pressure Monitor Standard Adult Cuff supplied might result in measurement error.
2.3 Display Symbols Symbols Operation Measure/Solution SYS (mm/Hg) Displays systolic value Upper value AA 1.5V AA 1.5V DIA (mm/Hg) Displays diastolic value Lower value AA 1.5V AA 1.5V PULSE (1/min) Displays pulse Pulse rate per minute Batteries indicator, empty Replace all the batteries Mobile Wireless Data Transmission See page 10 Error Message See page 12 ER (#) 2.5 Batteries Replacement 2.4 Batteries Installation NOTE: Batteries are not included 1. 2. 3.
2.6 Applying the Arm Cuff 2.7 Taking a Measurement CAUTION: Read all the information in the instruction manual and any other documents in the box before operating the unit. Sit in a chair with your feet flat on the floor, place your arm with the cuff on a table or on your lap so the cuff is level with your heart. Relax your arm. 4. Remove clothing from your upper (preferably left) arm 5. Apply the cuff to your arm so the arrow is centered on the inside of your arm and aligned with your middle finger.
5. The measurement is stored and sent automatically to your virtual Health Diary. You can access your data by login in the Nantlife portal or by using the NantLife Application on your smart mobile devices (Bluetooth enabled phones and tablets only). 6. The monitor will automatically turn off 10 seconds after sending the data through Bluetooth signal, or after 1 minute when it cannot find a Bluetooth connection. Notes: To STOP the inflation or measurement, press the button.
2.11 Using the Portal software and the NantLife Application NantLife Health Management Software and Application allow you to connect, control and share your blood pressure readings with the persons of your choice on a secured Healthcare dedicated platform. Your Health Diary is accessible through the NantLife portal and through NantLife Applications. 2.12 Evaluation by your care provider Your blood pressure measurements are stored in your NantLife health diary.
3 Care and Maintenance 4 Troubleshooting 3.1 Cleaning 4.1 Error Indicators If required, wipe the plastic casing with a damp cotton cloth only. Do not use abrasive or volatile cleaners. Important Note: The NantLife blood pressure meter cuff cannot be washed or dry-cleaned. Contact us at www.NantLife.com for part replacement. Error code Cause Er 1 Er 2 3.2 Maintenance Store the cuff inside the Smart Blood Pressure compartment when not in use. Do not forcefully bend the arm cuff and air tube.
4.2 Troubleshooting tips Description of the Problem 1 Solution The button is pressed but the measurement does not take place. The pumping does not start or stop prematurely.
1. 2. 3. 4. 5. 6. 7. 8. NantLife guarantees the blood pressure monitor excluding the arm cuff for one year from date of sale. The arm cuffs are warranted to be free from defects in material and workmanship appearing within one year from the date of purchase when the monitor is used in accordance with the instructions provided with the monitor. Proof of purchase must be supplied in the form of a correctly completed guarantee card or a receipt. Include a $5.00 for return shipping and handling.
6 Specifications 15 Model BP 4.
Power supply 4 alkaline 1.5V AAA batteries Battery Life Approximately 300 uses starting with new alkaline batteries when inflated to 170mmHg at 73°F (23°C) with standard adult cuff Unit dimensions 185mm x 138mm x 100mm Weight 980g (34.5oz) not including batteries 1 7.3” x 5.4” x 4” Note: These specifications are subject to change without notice.
™ Smart Blood Pressure User Guide KNOW YOUR MONITOR Removable Top Cover BOX CONTENTS 1 USER GUIDE INSERT BATTERIES 1 BLOOD PRESSURE MONITOR 1 ARM CUFF WITH TUBE AND AIR PLUG 2 Air Plug connected to Air Jack Arm Cuff Adult Size 9.8-13.
Add a Nurse to your wireless monitoring visit us at www.NantCare.
IMPORTANT REGULATORY INFORMATION This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interference that may cause undesired operation. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
