Installation & Assembly

INSTALLATION GUIDE
(ush mount and semi recessed vessels)
Required
Tools
INSTALLATION
1. Flip the sink over.
2. Apply a continuous bead of silicone
sealant / adhesive specically designed for
plumbing applications to the top side of
the rim.
3. 3. Flip the sink back over. Line up the drain
hole and the cut-out. Press rmly on the sink
to form a tight bond between the sink and
countertop.
4. Install drain and faucet to manufacturers
specications.
INSTALLATION
1. Carefully place sink in the cut out for sink.
2. Apply a continuous bead of silicone
sealant / adhesive specically designed for
plumbing applications to the top side of
the rim.
3.3. Wipe away any excess sealant- be sure to
ll any voids between sink and
countertopopening
Press rmly on the sink
to form a tight bond between the sink and
countertop.
4. Allow to cure before installing drain and
faufaucet to manufacturer specications.
COUNTER AND SINK
PREPARATION
Flushmount
1. Dry t the sink in the desired location.
Make sure to leave at least 5” at the rear of
the vanity for a faucet. Trace the drain hole.
2. 2. Remove sink and mark center point of
drain using the new outline.
3. Create a 5” diameter
hole cut-out using the
same center point.
4. Use appropriate
cutting tool for use
with specied with specied
counter material.
COUNTER AND SINK
PREPARATION
Semi-Recessed
1.Trace the base of the sink to create the
template of the
cut out hole in which the sink will rest.
2. 2. Align the template to in the desired location.
Make sure to leave at least 5” at the rear of
the vanity for a faucet, if faucet is not
a wall mount faucet.
4. Use appropriate cutting tool for use
with specied counter material to create
cut out
5”
FAUCET SPACE
5”
CUT-OUT
DRAIN OUTLINE
WHAT’S INCLUDED
Bathroom Vanity Vessel Bowl
WHAT’S NOT INCLUDED
Silicone Sealant/Adhesive
REPLACEMENT
If replacing a vessel sink with an undermount
pre-existing hole, make sure that the base of
the model you have chosen is larger than the
existing hole. This will allow for any
adjustments that might be needed for the
installinstallation process. Make sure that the base
is large enough to secure safely to the
existing countertop.
NEW INSTALLATION
When preparing for installation, it is
recommended that you consult with your
countertop fabricator as to your installation
preference.
HOMEOWNERS
Please read before installation.
WARNING
Before installation, please inspect your
product for any damage that may have
occurred during shipping. If the product was
damaged in the shipping process or your
product needs to be returned for another
rreason, it must be in the original packaging.
If the product is not returned with the original
packaging you may not be eligible for a
refund of the purchase price. Return fees
may apply. Please contact your dealer for
more information.
Universal Vessel Instructions
ACTUAL SINK SIZE
AND SHAPE MAY VARY.
CUSTOM
INSTALLATION
Vessel sinks require custom installation
based upon desired sink placement.
ATTENTION
This product requires professional installation.
Please provide your countertop fabricator
with this information. Please observe all state
and local building and plumbing codes.
Below Counter
* Instructional purposes only.
Sink shape/size may
vary from picture shown.
* Instructional purposes only.
Sink shape/size may
vary from picture shown.