User's Manual

Thank you for purchasing this NANUK case.
Please read the directions below to learn how to properly use and care for your case.
O-ring seal
Your NANUK case is equipped with an EPDM gasket that has been designed to give superior performance and resist compressive deformation over time. To ensure
a watertight seal, the gasket must be free of cuts, abrasions or tears. Debris or foreign material caught between the sealing rib on the bottom of the case and the
gasket on the top of the case will prevent the case from sealing properly. Applying a coat of an automotive type surface protector is recommended to help prevent
dirt and debris from sticking to the seal. If the seal becomes damaged a replacement seal can be ordered from Plasticase.
Cleaning
All NANUK cases are constructed of high impact NK-7 resin designed to absorb the shocks of transport. The surfaces of the case can easily be wiped clean with
a non-abrasive cleaner approved for use on plastic. Avoid using brushes that could scratch the case. To keep your case looking like new we recommend using an
automotive type surface protector.
Auto pressure equalizer
All NANUK cases are equipped with an automatic pressure release valve. This valve automatically equalizes the pressure on the inside of the case. To ensure correct
operation, this valve does not require any maintenance, does not need to be rotated or adjusted, and must not be blocked.
Care and Use
2