User's Manual

Place your items on top of the foam
leaving space between each item. The
multilayer design of the foam* allows the
layers of pre-scored foam to be tailored
individually to accommodate taller items
or to be used as separate levels to
protect a larger amount of smaller items.
To ensure optimum protection for your
equipment, it is important to keep all
of your items within the pre-scored grid
on the foam. This serves as a cushion if
ever the case falls or is impacted.
Once you are satised with your layout
you can mark the perimeter of the
cutout with tooth picks. You can remove
your items once you have indicated the
perimeter. Begin by carefully removing
the required foam squares as one piece
within the indicated outline. If some
foam cubes are removed by mistake
they can be reattached by using a spray
type adhesive. Removed foam blocks
can be reused if necessary or modied
to accommodate shallower items. A
utility knife can be used to modify the
foam cubes.
Customizable Cubed Foam
4
1 4
2
3
Customizable cubed foam is a simple and effective way to protect and organize your delicate items. If your case is equipped with cubed foam, follow the directions
below to t and protect your items.
Once all the required foam is removed
place your items in their respective
compartments to verify t. Your equipment
is now protected!
*Customizable cubed foam is available for all our cases. However, multilayer cubed foam is only available for the 915 and larger.