Operation Manual

19
Safety Instructions
• Hold firmly whenever plug-in or pull-out the DC plug from the socket.
• The DC power cord should keep a distance from electric heater.
• Never place any heavy objects
above the DC power cord.
• Do not attempt to repair or
re-construct the DC power cord.
• Avoid direct contact with any type
of liquid.
In case of accident, disconnect the DC power cord from the socket. External
electric sources like electrostatic discharge can cause negative effect on
normal operation of the player. Under such circumstance, power off the player,
or disconnect the power cord. Wait for a while, plug into the socket again and
the player recovers and operates properly again.
DAV311 Maintenance
1, Power off the player, and remove the disc after use.
2, If the player will not be used for a long time, disconnect the DC power cord
from the player. Open the deck regularly to maintain a good condition for the
internal components of the player.
3, Others:
 Keep the player away from insecticide or volatile substance.
 Avoid the player to contact with rubber or nylon substance constantly.
 Do not store the player at or near the following places:
1, Strong sunlight
2, Steam or soot
3, Extreme temperature
4, Electric heating devices
5, Strong magnetic fields
Attention: When DAV311 operates by using the DC power, the charging of
Ni-MH battery will also be activated if it is not completely charged yet.
This extra workload may cause the player to generate heat that is
relatively higher in temperature. However, please be advised that such
phenomenon should be considered as normal and users should not,
under any circumstance, attempt to cool down the player by any mean.