Operation Manual

progress. Please be advised that even when the charging is completed, the

LED will still be on. However, you are advised to turn the player off while the

charging is still in progress, as this will shorten the overall charging time of the

battery. Also, in order to avoid any possible damage caused to both the player

and battery, you are recommended not to charge the battery for more than 20

hours at any time.

3, Battery Charge Indicator

Power on the player, and observe the battery charge indicator displays at the

top right corner of the LCD, where users can

observe current battery status of their players.

All black indicates fully charged battery.

Important: To avoid any unexpected damage caused, disconnect the player

with the DC power connector when it will not be used for a long period of time.

4. Using “DAV311”

ATTENTION

For DAV311 to operate properly, please be sure the power supply input to the

player meets its specified requirement. The player may become faulty if the

electric current input exceeds the level of which the player is configured to

tolerate. On the contrary, the player may experience difficulty in operating when

the level of electric current input is lower than its specified requirement.

PLAY

1, Power on the player by connecting with the DC power supply connector, or

using the Ni-MH battery.

2, Open the deck by pressing down the “OPEN” button on the top of the player.

Load the player with a disc. Be sure the side labeled should face on top.

3, Close the deck. Press “PLAY” to power on

DAV311. The player will auto-scan the data on the

disc, and display the total number of tracks on the

LCD. The playback will start automatically from

the first track.

4, While playing, press “PLAY/PAUSE” once to

pause, and press again to release and keep on

playing.