Operation Manual

User’s Manual/English/ Version 1.0 / PA22
Page12 Index
6-3 Player Update(How to Refresh the Firmware)
The firmware in the player will be able to update
through Player Update utility running on your PC. To
update the firmware, user needs to run the MP3
Player Update utility from:
Start
->Program-> NAPA PA2x MP3 Player
Check the Current Firmware Version and Upgrade
Firmware Version. If you are sure it is the right
version to update, click on Start button. The firmware
is been updated to the player. Please wait until it is
finished.
Click Close button to exit.
About the Quick download option
Selected (default) : Update the firmware only
Not selected: Update the firmware and format the storage. Please backup
useful files if you want to update without Quick download.
How to Refresh the Firmware
Notice:
The firmware of the player may be corrupted if under illegal operations and
special weather conditions. The player can not work if the firmware is
corrupted. Please refresh the firmware to fix this problem.
How To Refresh The Firmware
1) Press and hold the Play button of the player;
2) Keeps on pressing the Play button and connect the player to your computer.
Release the Play button after 5 seconds.
3) Click and run the Player Update utility. Click on Quick download option to let it
be Not Selected status. Then click on Start button.
4) After it is completed, click on Close button to exit.
5) For the OS above Windows98, you can now click and run the Player Format
Utility. You can now Full Format the storage by click on Start button under
Media Recovery mode. It is one optional operation; helps check and fix the
storage errors.
6) When the Refresh is completed, you still can not find the Removeable Disk
drive in My Computer. Disconnect the player and reconnect to your computer.
7) You can download music to the player.
Waning: DO NOT DISCONNECT THE PLAYER WHILE FORMATING
AND/OR UPDATING. IT MAY CAUSE SEVERE DAMAGE TO THE PLAYER!