Technical Manual

2 All technical manuals are available in PDF format at tech.napcosecurity.com Napco iSecure Security System
Napco Security Technologies, Inc. (NAPCO) makes no repre-
sentations or warranties with respect to the contents hereof
and specifically disclaims any implied warranties of merchant-
ability or fitness for any particular purpose. Further, Napco
reserves the right to revise this publication and to make
changes from time to time in the content hereof without obli-
gation of Napco to notify any person of such revision or
changes.
Information furnished by Napco is believed to be accurate and
reliable. However, no responsibility is assumed by Napco for
its use; nor for any infringements of other rights of third parties
which may result from its use. No license is granted by impli-
cations or otherwise under any patent or patent rights of Nap-
co. Changes Or Modifications Not Expressly Approved By
The Party Responsible For Compliance Could Void The Us-
er's Authority To Operate The Equipment.
For systems that include CO detectors, the system must
be monitored by a central station.
Compliance Statement
Installation in accordance with this manual, applicable codes,
and the instructions of the authority having jurisdiction is man-
datory. Napco Security Technologies, Inc., reserves the right
to make product improvements and changes to product speci-
fications at any time. While every precaution was taken dur-
ing the preparation of this document to ensure its accuracy,
Napco assumes no responsibility for errors or omissions.
Fire Alarm System Limitations
Automatic fire alarm systems can not guarantee against prop-
erty damage, loss of property, or loss of life. An automatic fire
alarm system's ability to provide early warning of a developing
fire may be limited for a variety of reasons, but mainly due to
improper installation or maintenance. The best way to mini-
mize system failures is to perform regularly scheduled pre-
ventive maintenance in accordance with national and local fire
codes. All system components and wiring should be tested
and maintained by trained fire alarm system professionals.
All wireless devices, including Z-Wave devices, must be sig-
nal tested with all enclosure covers fully closed, including the
Go-Anywhere Hub.
Microsoft
®
and Windows
®
are registered trademarks of the
Microsoft Corporation.
All other trademarks cited in this manual and all other ©
Napco manuals are for reference only and are the property
of their respective owners.
This document contains proprietary information of Napco.
Unauthorized reproduction of any portion of this manual with-
out the written authorization of Napco is prohibited. The infor-
mation in this manual is for informational purposes only. It is
subject to change without notice. Companies, names and
data used in examples herein are fictitious unless otherwise
noted. Napco assumes no responsibility for incorrect infor-
mation this manual may contain. Refer to our website for the
latest revisions of the documentation.
Caution: Verify all components including those adhered
to walls with double-sided tape are secure and remain firmly
adhered. Regularly inspect components that could cause
injury; in addition, swallowing small components, such as
magnets or batteries, could injure small children; keep all
components away from children.
Copyright © by Napco Security Technologies, Inc.
333 Bayview Avenue, Amityville, New York 11701
Publicly traded on NASDAQ Symbol: NSSC
Visit our website at www.napcosecurity.com
For Sales and Repairs: [phone]
For Technical Service: [phone] or visit us at
tech.napcosecurity.com
(Note: Technical Service is for security professionals only)
Fax: [phone]
DO C UM E N T R E V I SI ON HI ST O RY
Date Revision Description of Changes
Dec 2019 WI2240LF  Original release.








