Manualshelf

Technical Manual

ManualsBrandsNapco Security Technologies ManualsComputers & AccessoriesThe Hub is the central unit that forms the alarm panel. The Hub connects to a variety of wireless sensors that perform various sensor interfaces in the premises.
12345678910
Napco iSecure Security System All technical manuals are available in PDF format at tech.napcosecurity.com 7
Now that the system is synchronized with the Master Secu-
rity Code, proceed to the next section to set up the cen-
tral station communications.
Dealer Account Activation & Programming (cont'd)
4. In the main programming "SYSTEM SETTINGS" screen,
select General Settings.
Enter the Master Code printed on the iSecure card in the
Master Security Code field, then click Save.
Any changes to the Master Security Code requires that you
exit and re-enter the iSecure Cloud Web Portal.
5. Click Log Out to exit, then log back in to the iSecure Cloud
Web Portal (www.iSecureByNapco.com) as described in
step 1 and step 2. Exiting and re-entering ensures that the
iSecure Cloud Web Portal and the Master Security
Code are synchronized and the system is fully protect-
ed by your secure account password.
When changes are made to the system, the Upload/
Download/Save/Restore button on the main program-
ming screen will appear yellow.
6. Click this yellow button, and click Download All Changes.
(or click Full Download for new accounts accessed for the
first time).
In the confirmation popup, click Yes, download! to send all
changes to the Go-Anywhere Smart Hub.