Manualshelf

Technical Manual

ManualsBrandsNapco Security Technologies ManualsComputers & AccessoriesThe Hub is the central unit that forms the alarm panel. The Hub connects to a variety of wireless sensors that perform various sensor interfaces in the premises.
12345678910
Napco iSecure Security System All technical manuals are available in PDF format at tech.napcosecurity.com 65
ISEC-WL-TOUCH "System Diagnostics"
The ISEC-WL-TOUCH "System Diagnostics" screen shown below is exclusive to the
ISEC-WL-TOUCH 4.3-inch 900MHz Color Touchscreen Wireless Keypad. It is designed to
help you find the optimum mounting location for your ISEC-WL-TOUCH keypad by displaying
the signal strength of the 900MHz radio signal link between the Go-Anywhere Hub and the
ISEC-WL-TOUCH keypad within the installation environment. This screen is accessed
by tapping the Settings ("gears") icon, then tapping the DIAG button.
Each button and field in this screen is described below:
Learned
Checked when the status of the ISEC-WL-TOUCH keypad is paired into the iSecure system; otherwise unchecked.
RF Channel #
Displays the frequency of the channel used for communications between the Go-Anywhere Hub and the ISEC-WL-
TOUCH keypad.
RSSI_kp (dBm)
RSSI (Received Signal Strength Indicator) is a measurement of the power present in a received radio signal. This field
displays the 900MHz radio signal that the ISEC-WL-TOUCH keypad received from the Go-Anywhere Hub.
RSSI_xcvr (dBm)
The RSSI value that the Go-Anywhere Hub received from this ISEC-WL-TOUCH Keypad.
Operating Freq (MHz)
Displays the wavelength, in megahertz, of the radio frequency used in communications between the Go-Anywhere Hub
and the ISEC-WL-TOUCH keypad.
Out of System in (sec)
Displays the number of seconds the communication link between the Hub and the ISEC-WL-TOUCH keypad was inter-
rupted. If Out of System, this field will count down.
ISEC-WL-TOUCH
Wireless 900MHz
Touchscreen