User's Manual

W415-0447 / B / 05.24.05

FIGURE 34

MANTLE CLEARANCES

Combustible mantle clearance can vary according to the

mantle depth. Use the graph to help evaluate the clearance

needed.

Do NOT use the fireplace if any part has been under

water.

Call a qualified service technician IMMEDIATELY to have

the fireplace inspected for damage to the electrical

circuit.

If access to the control area is necessary

BEFORE

INSTALLATION, remove the access panel.

The access panel must be re-installed before operating

the unit.

It is necessary to hard wire this fireplace.

Permanently framing the fireplace with an enclosure, re-

quires the fireplace junction box to be hardwired.

This fireplace must be electrically connected and grounded

in accordance with local codes. In the absence of local codes,

use the current CSA C22.1 CANADIAN ELECTRICAL CODE

in Canada or the ANSI/NFPA 70-1996 NATIONAL ELECTRI-

CAL CODE in the United States.

ELECTRICAL CONNECTION

HARD WIRING CONNECTION

SCHEMATIC

FIGURE 35