MODULAR CABINET ASSEMBLY INSTRUCTIONS INSTRUCTIONS D’ASSEMBLAGE DES CABINETS MODULAIRES Please use this manual in conjunction with your main manual to properly assemble your built-in grill. Refer to the main manual for operating, cleaning, and maintenance instructions. This grill is designed for NON-COMBUSTIBLE enclosures only, and must be installed and serviced by a qualified installer to local codes.
NAPOLEON gas grills are manufactured under the strict Standard of the world recognized ISO 9001-2000 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, and are assembled by trained craftsmen who take great pride in their work. NAPOLEON PRESIDENT'S LIMITED LIFETIME WARRANTY NAPOLEON warrants the following materials and workmanship in your new NAPOLEON product against defects for as long as you own it.
PLANNING YOUR NAPOLEON MODULAR OUTDOOR ISLAND The Napoleon Outdoor Modular Island series has been developed with versatility in mind. The cabinets can be assembled in virtually any combination to suit your individual needs. They can be assembled against a house wall or as a standalone island, becoming the focal point of your backyard.
TOOLS REQUIRED Check for missing or damaged parts before you begin and consult your local retailer if neccessary. 3/8 3/8 WRENCH OR NUTDRIVER ADJUSTABLE WRENCH PHILIPS SCREWDRIVER HAMMER GAS AND ELECTRICAL PIPING The piping up to the gas grill is the responsibility of the installer and piping should be located as shown in the built-in instructions. Do not use hose to connect the unit. It must be connected with either rigid pipe, copper tube or an approved flexible metal connector.
Les grils à gaz NAPOLÉON sont fabriqués conformément aux normes strictes du Certificat d’assurance de qualité mondialement reconnues ISO 9001-2000. Les produits NAPOLÉON sont conçus avec des composantes et des matériaux de qualité supérieure, assemblés par des artisans qualifiés qui sont fiers de leur travail.
PLANIFICATION DE VOTRE ÎLOT MODULAIRE EXTÉRIEUR NAPOLÉON La polyvalence est à la base de la conception de la série des Îlots modulaires extérieurs Napoléon. Pour convenir à vos besoins, la configuration des cabinets est presque illimitée. Les îlots peuvent être installés contre un mur de la maison ou comme îlot isolé, créant ainsi l’élément central de votre cour arrière. Grâce à ses fonctions multiples et à sa capacité de rangement, votre îlot peut être transformé en une cuisine extérieure.
OUTILS NÉCESSAIRES Avant de commencer, assurez-vous que les pièces ne sont pas endommagées et qu’il n’en manque aucune. Au besoin, consultez votre détaillant local. 3/8 CLÉ 3/8 ou TOURNEVIS À DOUILLE CLÉ À MOLETTE TOURNEVIS PHILLIPS MARTEAU INSTALLATION DE L’ALIMENTATION ÉLECTRIQUE ET DE LA TUYAUTERIE POUR LE GAZ L’installateur est responsable d’acheminer la tuyauterie au gril à gaz. La tuyauterie devrait être installée comme montré dans le manuel du gril encastré.
IM-UDC SIDE PANEL ASSEMBLY ASSEMBLAGE DES PANNEAUX LATÉRAUX 4x N570-0026 (#14 x 1/2") ALIGN REAR EDGES ALIGNEZ LES BORDS ARRIÈRE IM-UDC REAR PANEL ASSEMBLY ASSEMBLAGE DU PANNEAU ARRIÈRE 6x N570-0026 (#14 x 1/2") 8
IM-UDC TOP / BOTTOM RAIL ASSEMBLY ASSEMBLAGE DES RAILS SUPÉRIEUR ET INFÉRIEUR 4x N570-0026 (#14 x 1/2") 4x N570-0013 (#8 x 1/2") IM-UDC CABINET DOOR ASSEMBLY ASSEMBLAGE DE LA PORTE DU CABINET #1 2x N105-0011 DOOR CAN BE MOUNTED AS LEFT OR RIGHT OPENING LA PORTE PEUT ÊTRE INSTALLÉE POUR S’OUVRIR À GAUCHE OU À DROITE #2 9
IM-UTC SIDE PANEL ASSEMBLY ASSEMBLAGE DES PANNEAUX LATÉRAUX 4x N570-0026 (#14 x 1/2") IM-UTC REAR PANEL ASSEMBLY ASSEMBLAGE DU PANNEAU ARRIÈRE 6x N570-0026 (#14 x 1/2") 10
IM-UTC TOP / BOTTOM RAIL ASSEMBLY ASSEMBLAGE DES RAILS SUPÉRIEUR ET INFÉRIEUR 4x N570-0026 (#14 x 1/2") 4x N570-0013 (#8 x 1/2") IM-UTC PROPANE TANK SLIDER ASSEMBLY ASSEMBLAGE DE LA GLISSIÈRE POUR RÉSERVOIR DE PROPANE 4x N570-0026 (#14 x 1/2") 11
IM-UTC PROPANE TANK DRAWER INSTALLATION INSTALLATION DE LA TABLETTE POUR RÉSERVOIR DE PROPANE IM-UTC CABINET DOOR ASSEMBLY ASSEMBLAGE DE LA PORTE DU CABINET 2x N105-0011 #1 #2 12
IM-UTC PROPANE SUPPLY HOSE ROUTING ACHEMINEMENT DU BOYAU D’ALIMENTATION EN PROPANE The gas connection of the Mirage series grills is at the left of the control panel. Placing the tank enclosure cabinet to the left of the unit cabinet will make for easier gas piping. Knockouts have been punched in the sides and back panels to provide easy routing of gas or electrical piping.
CABINET TO CABINET ASSEMBLY INSTALLATION DE CABINETS CÔTE À CÔTE 4x N570-0026 (#14 x 1/2") IM-45T CABINET 45 DEGREE CONNECTION RACCORDEMENT DE CABINETS À 45 DEGRÉS 4x N570-0026 (#14 x 1/2") 14
IM-45T x 2 CABINET 90 DEGREE CONNECTION RACCORDEMENT DE CABINETS À 90 DEGRÉS 12 x N570-0026 (#14 x 1/2") IM-CEP CABINET END PANEL KIT ENSEMBLE DE PANNEAU D’EXTRÉMITÉ 4x N570-0026 (#14 x 1/2") 15
IM-CEP CABINET END PANEL KIT ENSEMBLE DE PANNEAU D’EXTRÉMITÉ 6x N570-0026 (#14 x 1/2") SHOWN WITH REAR PANEL REMOVED ILLUSTRÉ SANS LE PANNEAU ARRIÈRE COUNTERTOP TO BE FASTENED AS PER MANUFACTURER’S INSTRUCTIONS. HOLES HAVE BEEN PLACED ON THE TOP FLANGE OF THE SIDE PANELS TO ALLOW FOR FASTENERS. FIXEZ LE COMPTOIR EN RESPECTANT LES DIRECTIVES DU FABRICANT. DES TROUS ONT ÉTÉ MÉNAGÉS DANS LE REBORD SUPÉRIEUR DES PANNEAUX LATÉRAUX POUR Y INSÉRER LES PIÈCES DE FIXATION.
REFER TO BUILT-IN MANUAL THAT ACCOMPANIES THE GRILL FOR COMPLETE INSTRUCTIONS. GAS PIPING MUST BE DONE BY A LICENSED GAS INSTALLER. POUR DES DIRECTIVES COMPLÈTES, CONSULTEZ LE MANUEL QUI ACCOMPAGNE LE GRIL ENCASTRÉ. LA TUYAUTERIE POUR LE GAZ DOIT ÊTRE INSTALLÉE PAR UN INSTALLATEUR POUR LE GAZ AUTORISÉ.
IM-UDC # Part # 1 2 3 4 5 6 7 8 9 10 11 12 n475-0223p n475-0224p n570-0026 n010-0575p n570-0031 n525-0018p n105-0011 n555-0023 n010-0590 n430-0002 n080-0232p n570-0008 Description side panel / panneau avant back panel / panneau arrière screw , #14 x 1/2" / ecrou #14 x 1/2" assembly, bottom shelf / ensemble de tablette inférieur leveling foot / mise à niveau du pied rail, top/bottom / support superior/inférieur bushing, door / bagues de porte door pivot rod / tige-pivot de porte door assembly / ensemble
IM-3DC # Part # 1 2 3 4 5 6 7 8 n010-0600 n010-0601 n475-0224p n525-0018p n570-0031 n010-0575p n010-0573 n570-0026 Description side panel left / panneau avant gauche side panel right / panneau avant droite back panel / panneau arrière rail, top/bottom / support superior/inférieur leveling foot / mise à niveau du pied assembly, bottom shelf / ensemble de tablette inférieur draw er assembly / assemblage du tiroir screw , #14 x 1/2" / ecrou #14 x 1/2" IM-2DC # Part # 1 2 3 4 5 6 7 8 9 10 n010-0602 n010
IM-UGC245/300 / IM-UGC485 / IM-UGC600 / IM-UGC605 / IM-UGC705 # 245/300 485 450 600 605 730 1 2 3 4 5 6 7 8 9 10 11 n010-0602 n010-0603 n475-0224p n525-0031p n570-0026 n010-0573 n525-0018p n570-0031 n010-0575p n585-0062p n570-0013 n010-0602 n010-0603 n475-0229p n525-0019p n570-0026 n010-0580 n525-0022p n570-0031 n010-0579p n585-0050p n570-0013 n010-0602 n010-0603 n475-0229p n525-0025p n570-0026 n010-0580 n525-0022p n570-0031 n010-0579p n585-0053p n570-0013 n010-0602 n010-0603 n475-0256p n525-0027
ORDERING REPLACEMENT PARTS Before contacting the customer care department, check the NAC web site for more extensive cleaning, maintenance, troubleshooting and part replacement instructions at www.napoleongrills.com. Contact the factory directly for replacement parts and warranty claims. The customer care department is available between 9 AM and 5 PM (Eastern standard time) at 1-866-8208686 or fax at 1-705-727-4282. In order to process a claim, we must be provided with the following information: 1.
FAX TO: 705 727 4282 ACCESSORIES & PARTS ORDER FORM PLEASE PRINT CLEARLY CONTACT NAME:______________________________________________________________________ SHIP TO :_____________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _______________________________________________________________________________________
TÉLÉCOPIEZ AU: 705 727 4282 BON DE COMMANDE POUR PIÈCES/ACCESSOIRES NOM DU CLIENT______________________________________________________________________ ADRESSE:_____________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ _________________________________________________________________________________________ TÉL