SERIAL / SÉRIE#______________________ PRESTIGE II 308/450 MANUFACTURED BY / MANUFACTURE PAR: NAPOLEON APPLIANCE CORP., 214 BAYVIEW DR., BARRIE, ONTARIO, CANADA L4N 4Y8 PHONE: (705)726-4278 FAX: (705)725-2564 EMAIL: care@nac.on.ca WEB SITE: www.napoleongrills.com 92MA RETAIN THIS MANUAL FOR FUTURE REFERENCE. REFER TO OUR WEBSITE FOR AN ASSEMBLY VIDEO. GARDER CE LIVRE POUR RÉFÉRENCES FUTURES RÉFÉREZ-VOUS À NOTRE SITE WEB POUR UNE VIDÉO D'ASSEMBLÉE.
Do not try to light this appliance without reading "LIGHTING" instructions section of this manual. WARNING Do not store or use gasoline or other flammable liquids or vapors in the vicinity of this or any other appliance. An L.P. cylinder not connected for use must not be stored in the vicinity of this or any other appliance. If the information in these instructions is not followed exactly, a fire or explosion may result, causing property damage, personal injury or death.
NAPOLEON gas grills are manufactured under the strict Standard of the world recognized ISO 9001-2000 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, and are assembled by trained craftsmen who take great pride in their work.
GENERAL INFORMATION THIS GAS BARBECUE IS CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CAN/CGA-1.6-M95 AND ANSI Z21.58 -1995 RESPECTIVELY FOR OUTDOOR GAS GRILLS AND SHOULD BE INSTALLED to conform with local codes. In absence of local codes, install to the current CAN1-B149.2 Propane Installation Code in Canada or to the National Fuel Gas Code, ANSI Z223.1 in the United States.
GAS HOOK-UP INSTRUCTIONS CYLINDER CONNECTION: Ensure that the gas regulator hose is kink free. Remove the cap or plug from the cylinder fuel valve. Insert the black QCC1 regulator nipple onto the QCC1 fuel valve. Hand tighten clockwise. Do not use tools. Leak test all joints prior to using the barbecue. A leak test must be performed annually, and each time a cylinder is hooked up, or if a part of the gas system is replaced. PROPANE CYLINDER INSTALLATION: Set cylinder into hole in bottom shelf.
LIGHTING INSTRUCTIONS 450 SERIES 308 SERIES Open lid. REAR BURNER LIGHTING HOLE RIGHT REAR BURNER LEFT BURNER BURNER Ensuring all burner controls are in the off position, slowly turn on the gas supply valve. LIGHTING HOLE IGNITER IGNITER RIGHT CENTRE BURNER LEFT BURNER BURNER Main Burner Lighting Rear Burner Lighting Side Burner Lighting (optional) Turn left burner control to high position. Remove warming rack. Open burner cover. Press and hold igniter button until lit, or light by match.
COOKING INSTRUCTIONS When lit for the first time, the gas grill will emit a slight odour. This is a normal temporary condition caused by the "burn-in" of internal paints and lubricants used in the manufacturing process and will not occur again. Simply run the main burners on high for approximately ½ hour with the lid closed. MAIN BURNER USE: When searing foods, preheating is recommended by operating all main burners in the high position with the lid closed for approximately 10 minutes.
CLEANING THE OUTSIDE OF THE GAS GRILL - Do not use abrasive cleaners to clean any painted, porcelain or stainless steel parts. Porcelain enamel components must be handled with additional care. The baked on enamel finish is glass like, and will chip if struck. Touch-up enamel is available from your Napoleon Gas Grill dealer. Exterior grill surfaces should be cleaned while warm to the touch, with warm soapy water. To clean stainless surfaces, use a stainless steel cleaner or a non-abrasive cleaner.
BURNER - The burner is made from heavy wall 304 stainless steel, but due to the extreme heat and corrosive environment, surface corrosion will occur. Use a brass wire brush to remove surface corrosion. Clean any blocked ports using an opened paper clip. Do not enlarge the burner ports. Spiders and insects are attracted to the smell of propane and natural gas.
Problem Burner will not light with the igniter, but will light with a match. Possible Causes Solution Dead battery / or installed incorrectly. Replace with heavy duty 'AAA' battery. Install with positive terminal up. Loose electrode wire. Check that electrode wire is firmly pushed onto the terminal on the back of the igniter. Wrong replacement igniter. One spark systems must use a one spark igniter. Improper gap at electrode tip.
Ne tentez pas d’allumer cet appareil avant d’avoir lu la section “INSTRUCTIONS D’ALLUMAGE” de ce manuel. AVERTISSEMENT Pour votre sécurité n'entreposez pas et n'utilisez pas d'essence ou autres liquides et vapeurs inflammables à proximité de cet ou tout autre appareil. Une bonbonne de propane de propane non branchée ne devrait pas être entreposée à proximité de cet ou de tout autre appareil.
Les grils à gaz NAPOLÉON sont fabriqués conformément aux normes strictes du Certificat d’assurance de qualité mondialement reconnues ISO 9001-2000. Les produits NAPOLÉON sont conçus avec des composantes et des matériaux de qualité supérieure, assemblés par des artisans qualifiés qui sont fiers de leur travail.
INFORMATION GÉNÉRALE CE GRIL À GAZ EST CERTIFIÉ SELON LES NORMES NATIONALES CANADIENNES ET AMÉRICAINES, CAN/CGA-1.6-M95 ET AINSI Z21.58 - 1995 RESPECTIVEMENT POUR DES GRILS À GAZ POUR L’EXTÉRIEUR ET SON INSTALLATION DEVRAIT ÊTRE CONFORME AUX CODES LOCAUX. En l’absence de codes locaux, installez selon les normes courantes CAN1-B149.2 du code d’installation de Propane au Canada ou selon les normes ANSI Z223.1 du “National Fuel Gas” aux États-Unis.
INSTRUCTIONS DE BRANCHEMENT DU GAZ RACCORD DE LA BONBONNE: Assurez-vous que le tuyau du régulateur de gaz est sans anomalie. Enlevez les bouchons sur la soupape de gaz à la bonbonne. Connectez le régulateur QCC1 sur la soupape de gaz QCC1. Serrez à la main dans le sens des aiguilles d’une montre. N’utilisez pas d’outil. Faites un test de fuites sur tous les raccords avant d’utiliser le gril.
INSTRUCTION D’ALLUMAGE 308 SERIES 450 SERIES Ouvrez le couvercle BRÛLEUR D'ARRIERE BRÛLEUR DE DROITE ACCESS D'ALUMAGE BOUTON D'ALLUMEUR BRÛLEUR DE GAUCHE Fermez tous les boutons de contrôle des brûleurs, ouvrez la soupape d’alimentation en gaz lentement. BRÛLEUR D'ARRIERE ACCESS D'ALUMAGE BOUTON D'ALLUMEUR BRÛLEUR DE DROITE BRÛLEUR BRÛLEUR DE GAUCHE DE CENTRE Allumage du brûleur principal. Allumage du brûleur arrière. Allumage du brûleur latéral.
INSTRUCTIONS D’OPÉRATION Lorsqu’il est allumé pour la première fois, le gril dégagera une légère odeur. Ceci est un phénomène normal et temporaire causé par l’évaporation des peintures et lubrifiants internes utilisés dans le processus de fabrication et ne se reproduira pas. Allumez simplement votre gril sur “high” pendant une demi-heure. UTILISATION DU BRÛLEUR PRINCIPAL: Avant de cuire les aliments il est recommandé de préchauffer le gril à “high” avec le couvercle fermé pendant environ 10 minutes.
NETTOYAGE DE L’EXTÉRIEUR DU GRIL: N’utilisez pas de produits abrasifs pour nettoyer les pièces peintes, de fini porcelaine ou en acier inoxydable. Les éléments en porcelaine émaillée doivent être manipulés avec soin. Le fini émaillée étant cuit il devient comme du verre; il s’ébrèchera au moindre choc. Vous pouvez vous procurer de la peinture émaillée pour les retouches chez votre détaillant NAPOLEON.
BRÛLEUR - Le brûleur est fait d’acier inoxydable 304, mais en raison de la chaleur extrême et d’un environnement corrosif, il se produira une corrosion de surface. Enlevez cette corrosion à l’aide d’une brosse en laiton. Nettoyez les orifices bouchées à l’aide d’un trombonne déplié. N’agrandissez surtout pas les orifices du brûleur. Les araignées et les insectes sont attirés par l’odeur du propane et du gaz naturel.
Problème Causes Probables Solution Les flammes se détachent du brûleur, accompagnées d’une odeur de gaz et possiblement une difficulté d’allumage. Mauvais ajustement des volets d’air. Fermez légèrement les volets d’air selon les instructions d’ajustement des volets d’air. Le brûleur ne s’allume pas avec l’allumeur mais s’allume avec une allumette. La pile est déchargée ou installée incorrectement. Remplacez avec des piles AAA à grande capacité.
STAINLESS STEEL PARTS MAY HAVE A PROTECTIVE PLASTIC COATING, REQUIRED FOR THE MANUFACTURING PROCESS. PLEASE REMOVE THIS COATING BEFORE OPERATING THE UNIT. LES PIÈCES EN ACIER INOXYDABLE PEUVENT ÊTRE RECOUVERTES D'UNE PELLICULE DE PROTECTION, NÉCESSAIRE DURANT LE PROCÉDÉ DE FABRICATION. VOUS DEVEZ ENLEVER CETTE PELLICULE AVANT DE FAIRE FONCTIONNER L'APPAREIL. 3/8 1. 2X N570-0026 (#14 X 1/2") IF NECESSARY, THE CENTRE PANEL CAN BE TAPPED DOWN WITH A RUBBER MALLET.
3/8 3. 2X N570-0026 (#14 X 1/2") IF NECESSARY, THE CROSS BEAM CAN BE TAPPED DOWN WITH A RUBBER MALLET. SI NÉCESSAIRE, LE BARRE DE TRAVERSE PEUT ÊTRE ENFONCÉ AVEC UN MAILLET EN CAOUTCHOUC. 3/8 308 ONLY 308 SEULEMENT 4. 2X PROPANE ONLY PROPANE SEULEMENT N485-0012 4X N570-0026 (#14 X 1/2") 3" PRESTIGE II 2.
3/8 450 ONLY 450 SEULEMENT 5. 4X N570-0026 (#14 X 1/2") 3" PRESTIGE 2.25" PROPANE ONLY PROPANE SEULEMENT 6. 1X N485-0009 IF NECESSARY, THE MAGNET BRACKET CAN BE TAPPED DOWN WITH A RUBBER MALLET. SI NÉCESSAIRE, LE SUPPORT À AIMENT PEUT ÊTRE ENFONCÉ AVEC UN MAILLET EN CAOUTCHOUC.
7. + - 3/8 8. 4X N570-0026 (#14 X 1/2") TWO PEOPLE ARE REQUIRED FOR THIS STEP. DEUX PERSONNNES SON NÉCESSAIRES POUR CETTE ÉTAPPE.
2X N570-0026 (#14 X 1/2") 10. 24 3/8 ONLY 9.
3/8 11. STAINLESS STEEL DOORS ONLY EN ACIER INOXYDABLE PORT POUR CHARIOT SEULEMENT 1X N570-0026 (#14 X 1/2") 3/8 12.
12.
13. 3/4 14.
15. 16.
17.
ITEM 308 PART # 450 PART # 48 n010-0360p n010-0360p 49 n485-0011 49a n015-0004 49b n450-0023 50 n745-0007 n745-0007 51 n485-0012 52 n105-0002 n105-0002 53 n585-0026p n585-0025p 54 n080-0131p n080-0131p 55 n430-0002 n430-0002 56 n485-0009 n485-0009 57a n010-0395k n010-0392k 57b n010-0392b 57d n010-0395ss n010-0392ss 58 n325-0016 n325-0016 59 n555-0012 n555-0012 60 n080-0130p n080-0130p 61 n051-0001 n051-0001 62 n630-0003 n630-0003 63 n130-0010 n130-0010 n010-0211 n010-0216 n010-0212 n010-217 n240-0001 n240-0
18.
NAPOLEON APPLIANCE CORPORATION ACCESSORIES / PARTS ORDER FORM FAX TO: 1-705-727-4282 PLEASE PRINT CLEARLY CUSTOMER NAME: DATE: ADDRESS: MODEL #: SERIAL #: TELEPHONE: VISA OR MASTERCARD #: QUANTITY PRODUCT NUMBER TAXES & SHIPPING CHARGES MAY APPLY 32 EXPIRY DATE: DESCRIPTION