Installation Instruction

W415-1768 / B / 08.10.18
EN
4
table of contents
1.0 general information 5
1.1 rates and efficiencies 5
1.2 rating plate information 7
1.3 dimensions 8
2.0 venting requirements 9
2.1 typical vent installation 10
2.2 special vent installations 12
2.2.1 periscope termination 12
2.2.2 corner termination 12
2.3 minimum air terminal location
clearances 13
2.4 venting application flow chart 14
2.5 definitions 14
2.6 elbow vent length values 15
2.7 top exit horizontal termination 15
2.8 rear exit horizontal termination 17
2.9 top and rear exit vertical termination 19
2.10 rear exit 21
2.11 rear exit shield (for rear vent only) 21
2.12 top exit 22
3.0 rough framing 23
3.1 minimum framing dimensions 24
3.2 minimum enclosure clearances 25
4.0 venting installation 30
4.1 horizontal installation 31
4.2 vertical installation 31
4.3 using either flexible or rigid vent
components 32
4.3.1 horizontal air terminal installation 32
4.3.2 vertical air terminal installation 33
4.3.3 appliance vent connection 33
4.3.4 horizontal air terminal installation 34
4.3.5 vertical air terminal installation 35
4.4 vertical through existing chimney 36
4.4.1 restricting vertical vents 37
5.0 electrical information 38
5.1 battery back-up installation 39
5.2 optional wall switch 40
6.0 gas installation 40
7.0 operation (electronic) 41
8.0 operation (millivolt) 42
9.1 minimum framing dimensions 43
9.0 finish framing 43
10.0 finishing 44
10.1 safety barrier / door removal and
installation 44
10.2 front hood installation 45
10.3 non-combustible facing material 46
10.4 alcove clearances 47
10.5 minimum mantel clearances 47
10.6 recessed installation 48
10.7 log placement 49
10.8 charcoal embers 50
10.9 logo placement 50
11.0 adjustments 51
11.1 pilot burner adjustment 51
11.2 venturi adjustment 51
11.3 flame characteristics 52
11.4 optional anti condensation switch
(models B30NTRE-1 and B30PTRE-1
only) 52
12.0 maintenance 53
12.1 annual maintenance 54
12.2 door glass replacement 55
12.3 care of glass 55
13.0 replacement parts 56
13.1 overview 57
13.2 electronic valve train assembly 58
13.3 millivolt valve train assembly 59
14.0 accessories 60
15.0 troubleshooting (electronic) 61
16.0 troubleshooting (millivolt) 64
17.0 warranty 66
The information throughout this manual is believed to be correct at the time of printing. Wolf Steel
Ltd. reserves the right to change or modify any information within this manual at any time without
notice. Changes, other than editorial, are denoted by a vertical line in the margin.
note: