Manualshelf

Ascentâ„¢ Multi View BHD4 Manual

ManualsBrandsNapoleon ManualsFireplacesNapoleon 30000 BTU Built In Direct Vent Natural Gas Peninsula Fireplace with Safety Barrier and Glass Topaz Ember Set from the Ascent Series
51525354555657585960
W415-1285 / A / 11.03.14
52
EN
10.4 BURNER REMOVAL
10.4.1 LOG BURNER REMOVAL
A. Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
B. Vacuum the glass media out of the appliance. Ensure you insert a clean bag into your vacuum cleaner.
C. Remove the 12 screws securing the media tray, then remove the media tray from the appliance, as
shown below.
D. Remove the 4 screws securing the burner, as shown below. Then slide the burner off of the orifi ce and
remove from the appliance.
E. To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
venturi rests on the orifi ce.
C
A. Remove the door(s) refer to the "DOOR REMOVAL/INSTALLATION" section for instructions.
B. Carefully remove the logs from the appliance.
C. Remove all of the hearth pads, from the appliance. Refer to the "HEARTH PAD INSTALLATION/
REMOVAL" section for instructions.
D. Remove the 4 screws securing the burner in place. Then slide the burner off the the orifi ce and remove
from the appliance.
E. To reinstall the burner reverse these steps. NOTE: When reinstalling the burner ensure that the
venturi rests on the orifi ce.
10.4.2 GLASS BURNER REMOVAL
D